Skip to main content

Posts

Showing posts with the label juniper
It's been almost 2 years since I joined Juniper's SD-WAN "Contrail Service Orchestration" project and I am a bit sad leaving some great people behind and it was a tough decision but I couldn't spent enough time with my family.  I will definitely miss my time with Juniper Networks. 

Understanding Third-Party Next-Hop

source:    Petr Lapukhov Abstract This publication briefly covers the use of 3rd party next-hops in OSPF, RIP, EIGRP and BGP routing protocols. Common concepts are introduced and protocol-specific implementations are discussed. Basic understanding of the routing protocol function is required before reading this blog post. Overview Third-party next-hop concept appears only to distance vector protocol, or in the parts of the link-state protocols that exhibit distance-vector behavior. The idea is that a distance-vector update carries explicit next-hop value, which is used by receiving side, as opposed to the “implicit” next-hop calculated as the sending router’s address – the source address in the IP header carrying the routing update. Such “explicit” next-hop is called “third-party” next-hop IP address, allowing for pointing to a different next-hop, other than advertising router. Intitively, this is only possible if the advertising and receiving router are on a shared ...

IGP-TE

Configuring Node-Link Protection for OSPF You can configure node-link protection on any interface for which OSPF is enabled. Node-link protection establishes an alternate path through a different routing device altogether for all destination routes that traverse a protected interface. Node-link protection assumes that the entire routing device, or node, has failed. The Junos OS therefore calculates a backup path that avoids the primary next-hop routing device. Node-link protection is supported on: OSPFv2 and OSPFv3 interfaces OSPFv3 unicast realms OSPFv2 unicast topologies All routing instances supported by OSPFv2 and OSPFv3 Logical systems To configure node-link protection for an OSPF interface: Include the  node-link-protection  statement at the  [edit protocols (ospf | ospf3) area  area-id interface  interface-name ]  hierarchy level. Best Practice:  You must also configure a per-packet load-balancing routing policy to ensure t...

JunOS Conditional routing

It's really lovely how straight-forward the JunOS conditional routing is. There is a quick example how to configure it. In the example we are monitoring the IS-IS route 172.27.255.2/32 and if it's in the routing table we will generate 172.27.0.0/16 route. The important bit here is the generate route and the policy which is in the end of the 'generate route' statement. [edit logical-systems r1 routing-options] root@m# show generate { route 172.27.0.0/16 policy isis-present; } policy-statement isis-present { term 1 { from { protocol isis; level 1; route-filter 172.27.255.2/32 exact; } then accept; } term 2 { then reject; } }

Juniper IS-IS summary

##################################################################################################### ## ISIS ##################################################################################################### # Be sure to set family iso on the interface to be placed into ISIS set interfaces <interface> family iso # By default Junos places interfaces as L1/L2 # Default route leaking:         L1 to L2 - all internal routes         L2 to L1 - 0/0 route # L1/L2 will send the attached-bit down to L1 and it will act as a NSSA-like area.  When the L1 interface # receives the attached-bit it will inject a 0/0 route into the RIB point to the L1/L2 interface. # To disable the attached bit use: set protocols isis ignore-attached-bit # Be careful with the "interface all" command, as it may have some unexpected consequences such as trying # to establish a neighbor on your fxp0 management...

JN Topology version 2

Topology for practice. I am using LT interfaces to interconnect the logical  systems. 

JNxNS

The next step is to bring the virtual-routers and do something useful with these two gears. root@m120_lab_01> show version         Hostname: m120_lab_01 Model: m120 JUNOS Base OS boot [11.4R3.7] JUNOS Base OS Software Suite [11.4R3.7] JUNOS Kernel Software Suite [11.4R3.7] JUNOS Crypto Software Suite [11.4R3.7] JUNOS Packet Forwarding Engine Support (M/T Common) [11.4R3.7] JUNOS Packet Forwarding Engine Support (M120) [11.4R3.7] JUNOS Online Documentation [11.4R3.7] JUNOS Voice Services Container package [11.4R3.7] JUNOS Border Gateway Function package [11.4R3.7] JUNOS Services AACL Container package [11.4R3.7] JUNOS Services LL-PDF Container package [11.4R3.7] JUNOS Services PTSP Container package [11.4R3.7] JUNOS Services Stateful Firewall [11.4R3.7] JUNOS Services NAT [11.4R3.7] JUNOS Services Application Level Gateways [11.4R3.7] JUNOS Services Captive Portal and Content Delivery Container package [11.4R3.7] JUNOS Services RPM [11.4R3.7...

new book in my wish list

http://www.amazon.com/Juniper-MX-Series-Practical-Technologies/dp/1449319718/ref=reg_hu-rd_add_1_dp Why is there such fervent demand by enterprises and network service providers worldwide for the MX Series from Juniper Networks? With this authoritative book demonstrates how this routing device provides groundbreaking performance for high-density and high-speed Layer 2 and Layer 3 Ethernet services. You’ll get in-depth coverage of new features—including Multi-chassis LAG, Router Engine DDoS Protection, Inline NAT, and IPFLOW—all enabled by the next generation Junos Trio chipset.

Juniper M120s in the lab

Look what I found in the basement ;-) I hope I will find some time to upgrade those M120's and prepare them for testing.

junosphere

I just cancelled the dedicated server I have been using for Olive and I planing to try the junosphere from Juniper. I hope it will work better than Olive.  ------------------- Thank you for your recent Junosphere purchase. This email is to confirm your purchase—you will be receiving an email shortly that contains the authorization codes required to activate your Junosphere account.  Please allow 1 – 2 weeks for order fulfillment. Order Summary Junosphere Lab, JUS-LAB-10VM-1 Quantity 1 $50.00 Tax for Junosphere Lab, JUS-LAB-10VM-1 $11.50 TOTAL $61.50

Flapping LDP/RSVP on Olive

I had a strange problem where the LDP and RSVP was flapping on JunOS/Olive and I think I managed to fix it by changing the driver from e1000 to i82559er and lo0.0 with 127.0.0.1.  I don't want to spend more time investigating it but if someone have similar problem at least this comment could be a good start. root@jr2>  *** MPLS *** May 21 14:27:21.472443 Session 4.4.4.4 hold timer expired in Operational state May 21 14:27:21.473451 Connection 4.4.4.4 state Open -> Closed May 21 14:27:21.473838 Session 4.4.4.4 GR state Operational -> Nonexistent May 21 14:27:21.473923 Session 4.4.4.4 state Operational -> Closing May 21 14:27:21.474054 LDP session 4.4.4.4 is down, reason: hold time expired May 21 14:27:21.474364 RPD_LDP_SESSIONDOWN: LDP session 4.4.4.4 is down, reason: hold time expired May 21 14:27:21.475567 Session 4.4.4.4 state Closing -> Nonexistent May 21 14:27:21.476180 CHANGE   317024 /52          nhid ...

Wishlist

Guide 1  Junos MPLS and VPNs, Revision 10.a EDU-JUN-JMV-10.a Junos MPLS and VPNs, Revision 10.a. Student Guide, Detailed Lab Guide, High-Level Lab Guide, and Lab Diagrams. This five-day course is designed to provide students with MPLS- based virtual private network (VPN) knowledge and configuration examples. The course includes an overview of MPLS concepts such as control and forwarding plane, RSVP Traffic Engineering, LDP, Layer 3 VPNs, next-generation multicast virtual private networks (MVPNs), BGP Layer 2 VPNs, LDP Layer 2 Circuits, and virtual private LAN service (VPLS). This course also covers Junos operating system- specific implementations of Layer 2 control instances and active interface for VPLS. This course is based on the Junos OS Release 10.3R1.9. Through demonstrations and hands-on labs, students will gain experience in configuring and monitoring the Junos OS and in device operations. Guide 2  Junos Multicast Routing, Revision 11.a EDU-JUN-JMR-11.a Ju...

MPLS Static LSPs

I was trying to use the JNCIA and JNCIS study guides but looks like there are some changes between JunOS 8.x and 11.x in the way how static LSPs should be configured. There is an interesting post on 0x8847.net about the static LSPs that I am going to try. http://www.0x8847.net/2011/08/juniper-mpls-vpn-static-lsp/

JunOSphere

One of the main concerns with Juniper certification and training was how to find access to equipment.When Juniper introduced JunOSphere the cost for 1 month was around 1600USD and I believe you had to pay the whole amount at once and use the routers within the same month (?),however, now you can purchase a small day sessions for just 50$/day and using it whenever you want.  Check the Juniper website for more information. I will try to buy a session and provide more feedback about that. So far, good job Juniper.