Skip to main content

Mercedes’ DiesOtto engine does 39MPG in a S-class



Mercedes is attempting to beat rival Volkswagen to the market with the world’s first mass produced petrol engine that combines the torque and fuel economy of modern diesels with cleaner emissions. Efficient features that have been added to the engine include direct injection, turbocharging and variable compression. Unlike the VW design, the Mercedes engine doesn’t require special synthetic fuels and runs on regular petrol.


The initial concept engine is a small 1.8L four-cylinder, which delivers an amazing 238hp (175kW) and 400Nm of torque. Initial tests have seen fuel consumption at around 39mpg (6L/100km), and this was in a large S-class saloon. The engine works by using sparkless ignition, like a diesel, during low load conditions, and switches back to using a spark plug on cold starts and under full load.

Engineers have another trick up their sleeves. Fuel economy will improve even further with the addition of new hybrid technology, including an integrated starter-generator attached to the flywheel.

Popular posts from this blog

CompTIA+

Sometimes you just need a good distraction, and I randomly got the urge to study for an exam;  something I haven't done in years. I decided to look into network security and started watching some CompTIA training videos, and...it was all a bit too familiar. Apparently the search continues.

Juniper IS-IS summary

##################################################################################################### ## ISIS ##################################################################################################### # Be sure to set family iso on the interface to be placed into ISIS set interfaces <interface> family iso # By default Junos places interfaces as L1/L2 # Default route leaking:         L1 to L2 - all internal routes         L2 to L1 - 0/0 route # L1/L2 will send the attached-bit down to L1 and it will act as a NSSA-like area.  When the L1 interface # receives the attached-bit it will inject a 0/0 route into the RIB point to the L1/L2 interface. # To disable the attached bit use: set protocols isis ignore-attached-bit # Be careful with the "interface all" command, as it may have some unexpected consequences such as trying # to establish a neighbor on your fxp0 management...

The thing I didn't see coming

I keep forgetting I have this blog. But today felt like the right time to write something - something a bit more personal than usual. I want to talk about burnout. A while back I was deep in a very large infrastructure project. What started as a technical role slowly turned into something much broader - I found myself handling bits of legal, commercial negotiations, RFP work, supplier discussions. A lot of moving parts. And somewhere along the way, I realised I was doing most of it on my own. The late nights started adding up. Long calls with suppliers making sure the bill of materials was right, checking the solution actually held together end to end, always that nagging feeling that something had been missed somewhere. It just kept going. And then something shifted in me. It's hard to describe. I'd never experienced anything like it before - burnout, anxiety, call it what you want - but it hit me in a way I really wasn't prepared for. I've always been someone who...