Skip to main content

juniper - part 1

Since I started a new job I really don't have much time for studying for the CCIE lab - Looks like I will delay it with another year and during that year I will try to improve my Juniper knowledge by taking couple of exams in the Service Provider area.  So I assume most of my new posts will be juniper networks related.
Labels:

Popular posts from this blog

CompTIA+

Sometimes you just need a good distraction, and I randomly got the urge to study for an exam;  something I haven't done in years. I decided to look into network security and started watching some CompTIA training videos, and...it was all a bit too familiar. Apparently the search continues.
Read more >>

Juniper IS-IS summary

##################################################################################################### ## ISIS ##################################################################################################### # Be sure to set family iso on the interface to be placed into ISIS set interfaces <interface> family iso # By default Junos places interfaces as L1/L2 # Default route leaking:         L1 to L2 - all internal routes         L2 to L1 - 0/0 route # L1/L2 will send the attached-bit down to L1 and it will act as a NSSA-like area.  When the L1 interface # receives the attached-bit it will inject a 0/0 route into the RIB point to the L1/L2 interface. # To disable the attached bit use: set protocols isis ignore-attached-bit # Be careful with the "interface all" command, as it may have some unexpected consequences such as trying # to establish a neighbor on your fxp0 management...
Read more >>

The thing I didn't see coming

I keep forgetting I have this blog. But today felt like the right time to write something - something a bit more personal than usual. I want to talk about burnout. A while back I was deep in a very large infrastructure project. What started as a technical role slowly turned into something much broader - I found myself handling bits of legal, commercial negotiations, RFP work, supplier discussions. A lot of moving parts. And somewhere along the way, I realised I was doing most of it on my own. The late nights started adding up. Long calls with suppliers making sure the bill of materials was right, checking the solution actually held together end to end, always that nagging feeling that something had been missed somewhere. It just kept going. And then something shifted in me. It's hard to describe. I'd never experienced anything like it before - burnout, anxiety, call it what you want - but it hit me in a way I really wasn't prepared for. I've always been someone who...
Read more >>