Skip to main content

netmasterclass workbooks

I am planning to try another training provider so I found netmasterclass who are working with Cisco based on Cisco 360 training program. I will post some impressions after I go through few of the labs.
Labels:

Popular posts from this blog

SecurityIE Forum

http://www.securityie.com/ Securityie is an open forum for CCIEs and CCIE candidates to discuss issues and technologies related to the CCIE Security certification. Signing up is free. If you sign up for one forum you are automatically setup for our other forums Routerie and Voiceie. We have over 20000 members active on these boards many of which already have their CCIE.
Read more >>

Juniper IS-IS summary

##################################################################################################### ## ISIS ##################################################################################################### # Be sure to set family iso on the interface to be placed into ISIS set interfaces <interface> family iso # By default Junos places interfaces as L1/L2 # Default route leaking:         L1 to L2 - all internal routes         L2 to L1 - 0/0 route # L1/L2 will send the attached-bit down to L1 and it will act as a NSSA-like area.  When the L1 interface # receives the attached-bit it will inject a 0/0 route into the RIB point to the L1/L2 interface. # To disable the attached bit use: set protocols isis ignore-attached-bit # Be careful with the "interface all" command, as it may have some unexpected consequences such as trying # to establish a neighbor on your fxp0 management...
Read more >>

IOS on Unix (IOU)

source http://evilrouters.net/2011/01/18/cisco-iou-faq/ What is IOU? From the Cisco Engineering Education web site (a long time ago): IOS on Unix (IOU) is a fully working version of IOS that runs as a user mode UNIX (Solaris) process. IOU is built as a native Solaris image and run just like any other program. IOU supports all platform independent protocols and features. What operating systems does IOU run on? It is my understanding that, initially, IOU was Solaris (SPARC) only. Nowadays, however, there are also builds for OS X and Linux. Similar to dynamips, IOU allows you to build out a network topology on a computer, without the need for physical routers. This is useful for validating designs, proof-of-concept testing, and certification self-study. Is my system compatible with IOU? You will need to be running the operating system that your IOU image were built for, obviously. Other than that, there are no special requirements to run IOU. It is not very CPU- or memory-intensive, unlik...
Read more >>